82 / Registering individual portables
To confirm that the C3050 is registered
1.Close, then open the portable flap.
If the portable displays the system name that you just registered, proceed to step 5.
If the portable displays a different system name, or No system selected, proceed to step 2.
2.Press Í. The portable displays WIRELESS SYSTEMS.
3.Press the scroll keys (” or ’) until the system name is displayed.
4.Press SELCT (or OK if the correct system is already selected).
5.Press Òor L. You hear a dial tone, and the portable displays [.
6.If you do not hear a dial tone, check that you have selected the correct system and try to register the portable again.
7.Close the flap on the portable, and set the Ringer Control Switch to g.
8.If the portable is twinned with a desk telephone, make sure the desk telephone is idle and Call Forward is not active.
9.On another working telephone, dial the telephone number of the registered portable. If the portable rings, it is functioning properly.
If you do not hear a dial tone, or if the portable does not ring, refer to the Troubleshooting section in this guide. If you still cannot register the portable, contact your system supplier.
Modular ICS Companion Installer Guide | P0992639 01 |
