Testing
Testing the Companion portable telephones
You must register all portable telephones before testing them. For more detail on registering portable telephones, refer to Modular ICS Companion System Coordinator Guide and the Telephone Registration Instructions.
1.Verify that the portable telephone is ON.
2.Establish a connection to get internal dial tone. If no dial tone is present, the portable telephone may not be registered. Try to register the portable telephone again.
3.Verify that the portable telephone is using the correct registration slot.
4.Verify that the portable telephone can make a call.
5.Verify that the portable telephone has been assigned the correct extension number by calling a wired telephone and viewing the line number displayed.
Testing the base stations
1.Verify that the ICS is ON.
2.Verify that
3.Verify that the base station has been powered up correctly by checking that the green light is ON and the red light is OFF.
If the red light is flashing, it indicates that one of the following problems may exist:
•The base station is not connected to the ICS.
•The base station is faulty and should be replaced.
P0992639 01 | Modular ICS Companion Installer Guide |
