Nortel Networks P0992639 01 manual Registering individual portables

Registering individual portables / 79

•the radio IDs of all other base stations in the same location

1.Follow steps 1 to 5 of Measuring undirected RSSI on page 77.

If the display shows the ID of a base station neighboring the one you want to measure, proceed to step 2.

If the display shows the ID of the base station you want to measure, move out of the cell boundary range so that hand- off occurs and then continue with step 2. To end the undirected RSSI connection, press k.

2.Press m. The display shows MENU.

3.Press ,or .until the display shows Feature request.

4.Press SELCT . The display shows Feature: .

5.Press 8 9 9.

6.Enter the five-digit ID code for the base station radio you want to measure. This mode displays the radio ID of the base station to which the portable is linked, followed by the signal strength and power mode. For example, 14112 - 67.

Hand-off does not occur as you move between the cell boundaries. The link drops when you move out of range.

Note: In this example, the module is 14, the port is 11 and the radio is 2. The signal strength measured by the base station is -67dBm.

7. To end the connection, press k.

P0992639 01 Modular ICS Companion Installer Guide