Nortel Networks P0992639 01 manual Measuring Rssi for a C3060, Measuring undirected Rssi

Registering individual portables / 77

If a portable is registered on other systems, it will still be available on those systems. You deregister one system at a time.

Note: If you are out of range of the system, this procedure clears registration data only from the portable.

1.Press m***. The display shows ADMINISTRATION and three softkeys, SYS, PINFO, DATA.

2.Press SYS. The display shows WIRELESS SYSTEMS.

3.Press ERASE . The display shows Erase item? .

4.Press OK . The display shows Deregistering... and then

Item erased.

Measuring RSSI for a C3060

The Receive Signal Strength Indicator (RSSI) is a measurement of the signal strength the base station receives from the portable. The strongest RSSI value the display shows is -44dBm. The weakest RSSI value the display shows is approximately -94to -100dBm.

Measuring undirected RSSI

You can measure the signal strength between a portable and a system-selected base station using undirected RSSI.

1.Press m. The display shows MENU.

2.Press ,or .until the display shows Feature

request.

3.Press SELCT . The display shows Feature: .

4.Press 8 9 8. The display shows the radio ID of the base station to which the portable is linked, followed

P0992639 01 Modular ICS Companion Installer Guide