60 / Programming
Companion programming
Companion programming is found under the System programming heading. It includes the following subheadings:
Registration
Software Keys are required to activate wireless capabilities (U.S. only).
To take advantage of the wireless capabilities available to your Norstar system, you must first enable a certain number of portable credits using Software Keys purchased through Nortel Networks. Keys are obtained and entered into the system by the installer. For more detailed information on enabling Norstar Companion, refer to the Software keys (U.S. only) on page 67.
You must enable registration for the entire Norstar system to allow individual portables to register.
The options are Yes (Y) and No (N).
•Yes indicates that Registration is enabled.
•No is the default and indicates that Registration is not enabled.
Use ≠and CHANGE to enable or disable registration. Press CREDITS (U.S. only) to view the credits available.
Registration should normally be disabled.
For security reasons, and to prevent unauthorized users from being registered to your system, set registration to N when you have finished registering the portables.
Modular ICS Companion Installer Guide | P0992639 01 |
