Nortel Networks P0992639 01 manual Cells

Programming / 65

Cells

Cell programming allows you to examine the cell radio and cell neighbor configuration. Choose the cell you want to examine by pressing ≠and the cell number (01 to 32) or select LIST to see all in sequence. When in the list mode, there is a softkey that allows you to FIND a specific cell number.

From a specific cell number, select ≠to see all Cell radios, Cell neighbors and Cell radio neighbors.

Cell radios

This sub-heading allows you to view the five-digit number of any radios assigned to this cell.

For example, if radio 07012 is in the cell, the display shows 07012 asgned. Press ≠and enter the five-digit radio number to view the setting: Assigned or Unassigned. Select LIST to see all in sequence. Select SCAN to go to the list or next radio with a setting Assigned.

Cell nghbrs

This sub-heading allows you to view the two-digit number of any cells that border a particular cell in a system. You can then remove any of them or add more cells. Press ≠and enter the cell number to see the settings: Assigned or Unassigned. Select LIST to see each neighbor in sequence. Select SCAN to see the first/next cell Assigned.

For example cell 01, the display shows Nghbr:03 and Nghbr:04. This means that cells 03 and 04 have been assigned as cell neighbors.

P0992639 01 Modular ICS Companion Installer Guide