106 / Troubleshooting
Event messages
Event message display
Cause
(U.S. only) Unable to activate all registered portables. The system ran out of portable credits. One event is generated per portable that failed to activate. The repetition of the corresponding alarm code 59 indicates how many additional credits must be purchased.
The base station (on port 0103 in this case) cannot successfully receive the data image.
Both radios belonging to the base station are disabled. This may occur if the flash EEPROM is faulty. Two events are raised: one for the B1 channel radio (as in this case) and another for the B2 channel radio. A corresponding alarm code 53 occurs.
The base station (on port 0103 in this case) cannot be written to during data transfer.
Both radios belonging to the base station are disabled. The base station flash EEPROM is faulty. Two events are raised: one for the B1 channel radio (as in this case) and another for the B2 channel radio. A corresponding alarm code 53 occurs.
The base station (on port 0103 in this case) cannot be synchronized with the other base stations in the system.
Both radios belonging to the base station are disabled. The base station hardware is faulty. Two events are raised: one for the B1 channel radio (as in this case) and another for the B2 channel radio. A corresponding alarm code 53 occurs.
A B2 channel radio (radio 2 on port 0103 in this case) cannot be synchronized with other radios because of system overload.
Modular ICS Companion Installer Guide | P0992639 01 |
