Cisco Systems OL-8376-01 Reports FAQs and Troubleshooting, Telnet Credential Fields Required

Chapter 1 FAQs and Troubleshooting

Reports FAQs and Troubleshooting

Table 1-2 Telnet/SSH Credentials Required

Device Login Sequence	Telnet Credential Fields Required
Username:	User Name
Password:	User Password
prompt>enable
Password:	Enable Password
enable prompt #
Password:	User Password
prompt>enable	Enable Password
Password:
enable prompt#
Username:	User Name
Password:	User Password
enable prompt#
enable prompt#	(no credentials required)
Username:	User Name
prompt>enable	Enable Password
Password:
enable prompt#
Username:	User Name
prompt#
Username:	User Name
Password:	User Password
prompt>enable
Username:	Enable User Name
Password:
enable prompt#	Enable Password

Reports FAQs and Troubleshooting

•Reports FAQs, page 1-31

•Reports Troubleshooting, page 1-32

Reports FAQs

Q.When does data for the reports get aggregated?

A.The first weekly/monthly aggregation does not start at the beginning of the week/month. The first aggregation might happen earlier than the beginning of the week/month. After the first weekly/monthly aggregation, all subsequent weekly/monthly aggregation occurs every 7 days for weekly aggregation, or every 30 days for monthly aggregation from the first time the aggregation occurred.

Q.Are any of the Current or Trend reports real-time reports?

A.The reports are not real time. They are based on data that is collected periodically. The frequency with which the data is collected is user configurable (see Devices > Discover > Inventory > Polling). The data shown in reports is as current as the time the data was collected from the devices.

Q.In the Group Performance Report: RF Utilization, how is the value in the As Of column calculated?

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

OL-8376-01 1-31