Cisco Systems OL-8376-01 manual 2-20, Fault Description, Explanation, Related Setting

Chapter 2 Fault Descriptions

IDS (Intrusion Detection System) Faults

Table 2-3	IDS Faults (continued)
Fault Description		Explanation	Related Setting	Recommended Action
Number of CCMP Replay		The fault threshold set for the	IDS >	Verify that the fault threshold is set
Discarded is Degraded.		degraded state has been exceeded.	Manage IDS Settings	correctly.
		When the fault is cleared, the	> IDS-802.11x	If the threshold is set correctly,
			>CCMP Replays
		following message displays:		review your network to determine the
			Discarded
		Number of CCMP Replays		action necessary to clear the fault
		Discarded is OK.		condition.
Number of CCMP Replay		The fault threshold set for the
Discarded is Overloaded.		overloaded state has been
		exceeded.
		When the fault is cleared, the
		following message displays:
		Number of CCMP Replays
		Discarded is OK.
Number of EAPOL Flood		The fault threshold set for the	IDS >	Verify that the fault threshold is set
Count is Degraded		degraded state has been exceeded.	Manage IDS Settings	correctly.
		When this fault is cleared, the	> General IDS	If the threshold is set correctly,
			Settings > EAPOL
		following message displays:		review your network to determine the
			Detection
		EAPOL Flood Count is OK.		action necessary to clear the fault
				condition.
Number of EAPOL Flood		The fault threshold set for the
Count is Overloaded		overloaded state has been
		exceeded.
		When this fault is cleared, the
		following message displays:
		EAPOL Flood Count is OK.
Number of TKIP counter		The fault threshold set for the	IDS >	Verify that the fault threshold is set
measure is Degraded.		degraded state has been exceeded.	Manage IDS Settings	correctly.
		When the fault is cleared, the	> IDS-802.11x	If the threshold is set correctly,
			>TKIP Counter
		following message displays:		review your network to determine the
			Measure Invoked
		Number of TKIP Counter		action necessary to clear the fault
		Measure is OK.		condition.
Number of TKIP counter		The fault threshold set for the
measure is Overloaded.		overloaded state has been
		exceeded.
		When the fault is cleared, the
		following message displays:
		Number of TKIP Counter
		Measure is OK.

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-20 OL-8376-01