Panasonic CT-36SX31UE Geometry Adjustments Default Level, MTS Adjustment Default Level

Press the Power Button on the Remote Control to select the Serviceman Adjustment

For Adjustments:

1.Press Channel Up/Down on the	Note: Write	Down the	original	2.Press Volume Up/Down on the
Remote Control to select one of	value set (b in Fig. 20) for			Remote Control to adjust the
the available Service Adjustments	each	address	before	level of the selected Service
(a in Fig. 20).	modifying anything.		It is	Adjustment (b in Fig. 20).
	easy	to erroneously	adjust
	the wrong item.

		Geometry Adjustments	Default
			Level
	D00	H POSITION	13
	D01	V SIZE	37	CH
	D02	V S CORRECTION	5
	D03	V LIN CORRECTION	8
	D04	E/W TRAPEZIUM	9	CH
	D05	V AGC	1
CH	D06	V POSITION	1
	D07	V CENTERING	65
	D08	V CENTERING DAC SW	0
	D09	V-BLK START	12
	D0A	V-BLK STOP	14
	D0B	EW CORNER	6
	D0C	EW PARABOLA	11
	D0D	H WIDTH	20
	D0E	OSD POSITION	90
				PW
		MTS Adjustment	Default
			Level
CH	M00	INPUT LEVEL	33
	M01	LOW-LEVEL SEPARATION	6
	M02	HIGH-LEVEL SEPARATION	25	PW

To P Items.

Note: Some adjustment modes may not be available in some formats.

IMPORTANT NOTE:

Always Exit the Serviceman Mode Following Adjustments.

- 19 -