Cisco Systems OL-8376-01 Fault Description, Explanation, Related Setting, Recommended Action

Chapter 2 Fault Descriptions

Access Point /Bridge Faults

Table 2-1	Access Point Faults (continued)
Fault Description		Explanation	Related Setting	Recommended Action
Ethernet bandwidth		The fault threshold set for the	Manage Fault	Verify that the fault threshold is set
utilization is Degraded		degraded state has been exceeded.	Settings > Access	correctly.
(utilization %)		When this fault is cleared, the	Point/Point	If the threshold is set correctly, review
			Thresholds >
		following message displays: Ethernet		your network to determine the action
		bandwidth utilization is OK.	Ethernet Port	necessary to clear the fault condition.
			Utilization
Ethernet bandwidth		The fault threshold set for the	Manage Fault	Verify that the fault threshold is set
utilization is		overloaded state has been exceeded.	Settings > Access	correctly.
Overloaded		When this fault is cleared, the	Point/Bridge	If the threshold is set correctly, review
(utilization %)			Thresholds >
		following message displays: Ethernet		your network to determine the action
		bandwidth utilization is OK.	Ethernet Port	necessary to clear the fault condition.
			Utilization
Excessive frame counts:		See IDS (Intrusion Detection System) Faults, page 2-14

•Action

•Association

•Authentication

•Deauthentication

•Disassociation

•Probe

•Reassociation

Firmware version	The wrong version number for policy	Manage Fault	Make sure that the firmware version
policy violation	checking has been entered.	Settings > Access	that is entered in the policy setting
(version number)	When this fault is cleared, the	Point/Bridge	matches the firmware version on the
		Policies >	access point.
	following message displays:
		Firmware Version
	Firmware version is valid.
	The access point is running an		Make sure that you have entered
	unauthorized firmware version.		authorized versions in the policy
	When this fault is cleared, the		setting.
	following message displays:		Update the firmware on the access
	Firmware version is valid.		point to an authorized version.

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

OL-8376-01 2-5