Panasonic DMC-TZ55 operating instructions 166, Memory Card Error/This memory card cannot be used

Others

[Memory Card Error]/[This memory card cannot be used]

•Use a card compatible with this unit. (P19)

[Insert SD card again]/[Try another card]

•An error has occurred accessing the card. Insert the card again.

•Insert a different card.

[Read Error/Write Error Please check the card]

•It has failed to read or write data.

Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to read or write the data again.

•The card may be broken.

•Insert a different card.

[Motion recording was cancelled due to the limitation of the writing speed of the card]

•Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.

•In the event that it stops even after using a “Class 4” card or higher, the data writing speed has deteriorated so it is recommended to make a backup and then format (P50).

Depending on the type of the card, motion picture recording may stop in the middle.

[A folder cannot be created]

•A folder cannot be created because there are no remaining folder numbers that can be used. Format the card on this unit after saving necessary data on a PC etc. (P50)

[This battery cannot be used]

•Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer or Panasonic.

•If the battery terminal is dirty, clean it and remove any objects.

- 166 -