- 141 -
Wi-Fi
You can transfer images while charging the camera.
Preparation:
Configure [Smart Transfer] in advance. (P140)
1Turn off the camera.
2(When using a power outlet)
Connect the AC adaptor (supplied) and this camera with the USB connection cable
(supplied), and insert the AC adaptor (supplied) into the power outlet.
(When using a PC)
Connect this unit to a PC by using the USB connection cable (supplied).
[Smart Transfer] starts automatically according to the [Charge Priority] (P142) setting.
Depending on the specifications of the PC, [Smart Transfer] may fail.
If there are images that are not transferred when [Auto Transfer] is set to [OFF], the message that
confirms whether to transfer these images is displayed. Select a desired option.
You can transfer images immediately.
Preparation:
Configure [Smart Transfer] in advance. (P140)
1Connect the AC adaptor (supplied) and this camera with the USB connection cable
(supplied), and insert the AC adaptor (supplied) into the power outlet.
2Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P41)
3Press 3/4 to select [Smart Transfer], and press [MENU/SET].
4Press 3/4 to select [Transfer Now], and press [MENU/SET].
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Transferring automatically
Transfer images instantly