Panasonic DMC-TZ55 To transfer images automatically Smart Transfer, 139, Example of Auto Transfer

Wi-Fi

To transfer images automatically ([Smart Transfer])

Smart Transfer is a function that automatically transfers images in the camera to a PC. The transfer starts when you connect the camera to the AC adaptor (supplied).

[Auto Transfer] transfers images automatically when charging starts, while [Transfer Now] transfers them immediately.



Example of [Auto Transfer]

AAC adaptor (supplied)

BUSB connection cable (supplied)

C PC







1Set [Auto Transfer] to [ON]

2 Record

3 Charge

4 Start a transfer

To perform Smart Transfer, follow the steps below:

1Set up Smart Transfer (initial setup). (P140)

2Perform [Auto Transfer] (P141) or [Transfer Now] (P141).

•When [Auto Transfer] is set to [ON], the camera automatically uploads recorded images. For this reason images may be uploaded unintentionally if, for example, you share this unit with other people.

Panasonic assumes no responsibility for any damages caused by uploaded images.

•Panasonic assumes no responsibility for any damages caused by the use of [Smart Transfer].

•When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to [ON], and turn off the camera because electromagnetic waves, etc. emitted by the camera may interfere with gauges. (P45)

•When a charging error occurs, Smart Transfer may not be performed. (P168)

•Smart transfer is not available for images stored in the built-in memory.

•[Smart Transfer] is not available when the memory card is locked.

•During [Smart Transfer] (when the Wi-Fi connection lamp is flashing in blue), priority will be given to the transfer operation. You cannot turn on the camera.

- 139 -