Lucent Technologies 117A4 Now go to Installation Self Test for Remaining Radio Modules

Installing Multiple Carriers Model 117A4 Carrier Installation Instructions

8Insert the free end of each telephone line cord into the appropriate extension jack or terminal/station connector on your communications system switch/control unit (refer to your communications system manual for the proper location).

N	X
S	T
I	E
O	N
N	S
S	I	MUSIC
	O
		ON
	N	HOLD
	S

9Power the carriers as follows:

If the carriers are
plugged into...	Then...
One surge suppressor strip	Power the strip
	Result: All carriers will turn on simultaneously.
Wall outlets	Plug in the power for the Carriers in this order:

Control	Expansion	Expansion	Expansion	Expansion
Carrier	Carrier #1	Carrier #2	Carrier #3	Carrier #4
1	2	3	4	5

!CAUTION:

Never connect or disconnect expansion cables or telephone line cords, or insert or remove radio modules, while the carrier is plugged into the wall outlet.

10Now go to "Installation Self Test for Remaining Radio Modules" (page 40).

Model 117A4 Carrier Installation Instructions 503-801-180 Issue 2 February 1999 39