Lucent Technologies 117A4 installation instructions If the carriers are Plugged into Then

Installing Multiple Carriers Model 117A4 Carrier Installation Instructions

8Power the carriers as follows:

If the carriers are
plugged into...	Then...
One surge suppressor strip	Power the strip
	Result: All carriers will turn on simultaneously.
Wall outlets	Plug in the power for the Carriers in this order:

Control	Expansion	Expansion	Expansion	Expansion
Carrier	Carrier #1	Carrier #2	Carrier #3	Carrier #4
1	2	3	4	5

!CAUTION:

Never connect or disconnect expansion cables or telephone line cords, or insert or remove radio modules, while the carrier is plugged into the wall outlet.

Keep in mind that a Model 117A3 control carrier must have a module in Slot 6 in order to synchronize correctly with the remaining carrier(s).

9Now go on to "Installation Self Test with a Single Radio Module in Each Carrier" (page 34).

Model 117A4 Carrier Installation Instructions 503-801-180 Issue 2 February 1999 33