Before using your ANA 9500, be sure to raise the antenna to the vertical position.
Raise to
Vertical
Position
Attaching the Belt Clip to the Handset
You can use the Belt Clip to attach the Handset to your belt or pocket for convenient portability.
Snap the tabs of the Belt Clip into the notches on the sides of the Handset.
To remove the Belt Clip , pry one tab at a time from the notch on the side of the Handset. Carefully lift the Belt Clip off.
VOL | MUTE |
(CAUTION: The Belt Clip is designed to fit snugly onto the Handset.)
Installing the Handset Battery Pack
1.Place the Battery Pack onto the Handset so that it slides easily along the ridges.
2.Slide the Battery Pack up onto the Handset until it clicks into place.
10