Using Your ANA 9500 Memory
Use these buttons to operate the
ANA 9500 Memory
R/VOL
▲
▲
MUTE
Storing a Number
1.Press MEMO. You will hear a beep, and see the message:
2.Enter the number (up to 16 digits) you want to store.
a.To program a Pause in the dialing sequence, press.
b.To program a “Hook Flash” in the dialing sequence, press F1.
3.Press MEMO. You will see the message:
4.Enter the number (01)
Note: After pressing MEMO the second time, you have
20 seconds to enter the memory location. Otherwise, an error tone sounds and the unit returns to Standby.
5. The ANA 9500 then returns to Standby mode.
20