Charging Spare Battery Packs
The Base Unit of your ANA 9500 is equipped with a Battery Charger for charging an Optional Spare Battery Pack.
1.Position the Battery Pack so the inner side is facing toward the top of the Base Unit.
2.Slide the Battery Pack into
the Charging Compartment until it clicks into place. (Note: The Battery Pack Charging Compartment has a latch that keeps the Battery Pack in place during charging.)
+ | – | DC IN 10V |
LINE OUT | LINE IN | |
AC ADAPTOR |
| |
Tone
Pulse
Make sure the BATTERY CHARGE LED lights. If the
BATTERY CHARGE LED does not light, check to see that the AC Adapter is plugged in, and that the Battery Pack is seated into the Charging Compartment.
Note: Charge the Standard 400 maH Battery Pack without interruption for
When charging is complete, press down on the latch to remove the Battery Pack for use. Or, if you don’t need the Battery pack immediately, leave it in the Charging Compartment (It will not overcharge.)
Low Battery Indicator
When the Battery Pack in the Handset is low and needs to be charged, you will see a message on the display.
On a Call | In Standby Mode |
|
|
|
|
Only the TALK button operates. | None of the buttons operate. |
|
|
Handset beeps once every 3 seconds | Handset beeps once. |
|
|
Complete your call as quickly as possible | Cannot make call. |
|
|
Replace Battery pack within 20 seconds | Replace Battery Pack before making a |
to continue call. | call. |
|
|
Return the Handset to the Base Unit for charging or replace the Handset Battery Pack with another charged Battery Pack.
12
