July 1994 7
Philips Semiconductors Product specification
6 W hi-fi audio power amplifier TDA2613
Notes to the characteristics
1. Power bandwidth at Po max −3 dB.
2. Ripple rejection at RS = 0 Ω, f = 100 Hz to 20 kHz;
ripple voltage = 200 mV (r.m.s. value) applied to positive or negative supply rail.
Operating mode: symmetrical power supply; test circuit as per Fig.3;
VP = ± 12 V; RL = 8Ω; Tamb = 25 °C; f = 1 kHz
Total quiescent current Itot 10 20 35 mA
Output power THD = 0,5% Po56 −W
THD = 10% Po6,5 8,5 −W
Total harmonic distortion Po= 4 W THD −0,13 0,2 %
Power bandwidth THD = 0,5%
note 1 B −40 to 16 k −Hz
Voltage gain Gv29 30 31 dB
Noise output voltage
(r.m.s. value);
unweighted (20 Hz to
20 kHz) RS = 2 kΩVno(rms) −70 140 µV
Input impedance |Zi|142026kΩ
Supply voltage
ripple rejection SVRR 40 60 −dB
DC output offset with respect
voltage to ground Vos −30 200 mV
PARAMETER CONDITIONS SYMBOL MIN. TYP. MAX. UNIT