Philips TDA8567Q 425 W BTL quad car radio power

1998 Sep 23 2
Philips Semiconductors Product specification
4×25 W BTL quad car radio power
amplifier TDA8567Q
FEATURES
•Requires very few external components
•High output power
•Low output offset voltage
•Fixed gain
•Diagnostic facility (distortion, short-circuit and
temperature pre-warning)
•Good ripple rejection
•Mode select switch (operating, mute and standby)
•Load dump protection
•Short-circuit safe to ground and to VP and across the
load
•Low power dissipation in any short-circuit condition
•Thermally protected
•Reverse polarity safe
•Electrostatic discharge protection
•No switch-on/switch-off plop
•Flexible leads
•Low thermal resistance
•Pin compatible with the TDA8568Q, except for the gain.
GENERAL DESCRIPTION
The TDA8567Q is an integrated class-B output amplifier in
a 23-lead Single-In-Line (SIL) plastic power package.
It contains four amplifiers in BTL configuration, each with a
gain of 26 dB. The output power is 4×25 W in a 4 Ω load.
APPLICATIONS
•The device is primarily developed for car radio
applications.
QUICK REFERENCE DATA
ORDERING INFORMATION
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
VPoperating supply voltage 6 14.4 18 V
IORM repetitive peak output current −−7.5 A
Iq(tot) total quiescent current −230 −mA
Istb standby current −0.2 100 µA
Isw switch-on current −−80 µA
Ziinput impedance 25 30 −kΩ
Pooutput power THD =10% −25 −W
SVRR supply voltage ripple rejection Rs=0Ω−60 −dB
αcs channel separation Rs=10kΩ−50 −dB
Gvclosed loop voltage gain 25 26 27 dB
Vn(o) noise output voltage Rs=0Ω −−120 µV
∆VODC output offset voltage −−150 mV
TYPE
NUMBER
PACKAGE
NAME DESCRIPTION VERSION
TDA8567Q DBS23P plastic DIL-bent-SIL power package; 23leads (straight lead length 3.2 mm) SOT411-1