Philips TDA8567Q amplier TDA8567Q

1998 Sep 23 8
Philips Semiconductors Product specification
4×25 W BTL quad car radio power
amplifier TDA8567Q
DC CHARACTERISTICS
VP= 14.4V; Tamb =25°C; measured in Fig.7; unless otherwise specified.
Notes
1. The circuit is DC adjusted at VP= 6to 18 V and AC operating at VP=8.5 to 18 V.
2. At 18V<V
P< 30V the DC output voltage ≤1⁄2VP.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
Supply
VPsupply voltage note1 6 14.4 18 V
Iq(tot) total quiescent current RL=∞−230 360 mA
Operating condition
V15 mode select switch level 8.5 −VPV
I15 mode select switch current V15 = 14.4 V −30 80 µA
VOoutput voltage note2 −7.0 −V
∆VOoutput offset voltage −−150 mV
Mute condition
V15 mode select switch level 3.3 −6.4 V
VOoutput voltage note2 −7.0 −V
∆VOoutput offset voltage −−150 mV
Standby condition
V15 mode select switch level 0 −2V
I
stb standby current −0.2 100 µA
Diagnostic
V9diagnostic output voltage during any fault condition −−0.6 V
Tvj temperature pre-warning V9= 0.6 V −145 −°C