1999 Apr 14 35
Philips Semiconductors Product specification
Audio processor with head amplifier for VHS hi-fi TDA9605H
12 RECORD MODE CHARACTERISTICS
VCC = 12 V; Tamb=25°C; tuner audio input level 8 dBV at f = 1 kHz; auto-calibrated; measured in typical application
circuit of Fig.14; unless otherwise specified.
Notes
1. B = 20 Hz to 20 kHz, unweighted.
2. Amplitude of 400 kHz intermodulation product fc(R) and fc(L) compared to amplitude of recording current fc(R) +f
c(L).
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
Noise reduction (test 25b)
THD total harmonic distortion tuner input signal at
normal level 8 dBV 0.1 0.3 %
high level +8 dBV 0.2 1.0 %
αcb channel balance 1 0 +1 dB
αlin linearity tuner input signal at
low level 68 to 8 dBV 32 30.5 29 dB
high level 8 to +8 dBV 7.5 8 8.5 dB
αnnoise level with respect to
signal level tuner input signal level
from −∞ to 8 dBV; note1
−−46 41 dB
tatt attack time in accordance with VHS specification 5ms
trec recovery time in accordance with VHS specification 70 ms
αres(f1) frequency response 300 Hz tuner input frequency from
300 to 1000 Hz
0.7 0.2 +0.3 dB
αres(f2) frequency response 10 kHz tuner input frequency from
10 to 1 kHz 3.1 3.9 4.7 dB
αres(lpf1) audio low-pass filter
response 20 kHz tuner input frequency from
20 to 1 kHz; test 26b
0.5 0.1 +0.5 dB
αres(lpf2) audio low-pass filter
response 60 kHz tuner input frequency from
60 to 1 kHz; test 26b
−−24 12 dB
FM modulator
THD total harmonic distortion fFM = 50 kHz; test 25a and 26a 0.1 0.2 %
fFM(max) maximum FM deviation of
clipper test 25a and 26a 140 150 160 kHz
fc(acc) carrier frequency accuracy auto-calibration 5 0 +5 kHz
fccarrier frequency difference fc(R) fc(L) for NTSC auto-calibration 399.2 401.2 403.2 kHz
fc(shift) carrier frequency shift NTSC/PAL system switching 97 100 103 kHz
TC temperature coefficient −±50 ppm/K
Noise reduction and FM modulator
fFM FM deviation 44.5 50 56.1 kHz
Record output on pin RECOUT
Io(acc) output current accuracy left and right carrier 1stharmonic 1.5 0 +1.5 dB
αf(acc) carrier mix ratio accuracy left compared to right carrier 1 0 +1 dB
αIM2 IM2 product note 2 −−66 dB