L9 1883.1 GB 1/8 15/11/00 13:10 Page 9
General use
Choice of TV or radio mode
a
RADIO
~π °
¬ ◊
ON/OFFSETRESET
ALARM
Your set may receive both TV programmes and FM radio stations.
The jkey on the remote control is used to switch between TV mode and radio mode.
TV mode
The TV programmes appear
Radio mode
The television screen is off.The sound from the radio comes out of the speakers on the left and right of the set.
Note: in radio mode, the Hkey gives direct access to a limited number of settings and the INSTALLATION menu is specific to the radio reception.
Selecting the programmes
B
Z e I.S. /
1 2 3
4 5 6
7 8 9
SMART
TV mode
Use the P @#or 09keys to select the programmes (from 0 to 5 ). The number and sound mode are displayed for a few moments on the screen.To compose a
The title of certain programmes appears for a few moments at the bottom of the screen.To view a programme that has been locked, enter the confidential code (see p. 13).
é | 0 | È |
MENU |
| L OK |
a | c | P |
Radio mode
Use the P @#or 09keys to select the FM radio stations (from 1 to 40).The number, frequency and sound mode are displayed for a few seconds before the screen goes blank.
List of radio stations
In radio mode, the Ókey dislays or clears the list of radio stations.You can then use the Ior Jkeys to change the station.
To change the page, select <> (using I) then press Kor Lto display the previous or following pages. You can also modify how the stations are stored (see p. 7).
Screen information
B
Z e I.S. /
1 2 3
4 5 6
7
TV or radio mode
Press to display for a few seconds or clear the programme number, time and sound mode. In radio mode, the frequency of the station is also displayed.
Permanent display of the programme number
Press for five seconds to activate the permanent display of the programme number. Press once to cancel.
9