7
TSU9400 Starter’s Guide
3Adjust the pages of the different activities.
Delete or add buttonsto create a personal layout for every customer individually.
Tip The configuration file contains Favorites pages, where you can group the favorite TV
and radio channels of your customer in categories. Position the logo on the placeholder
and assign the correct channel macros via the Channel Macro Wizard.
4Adjust the codes.
Before you adjust the codes in the configuration file, you add the codesof the specific
A/V component of the customer in My Database.
Read more about the use of My Databasein the ProntoEdit Professional Online Help.
To add codes to My Database:
•In Factory Database, search the device, based on its model number and add it to
My Databasevia the button .
-Or-
•In My Database, learn the codes from the original remote control of the
A/V component.
1Connect the Control Panel to the PC with the USB cable.
2Place the original remote 4 to 6 inches (10-15 cm)from the Control Panel in
line with its learning eye.
Check if both the batteries are sufficiently charged.
3Press and hold the key of the original remote for more than 1 second.
Tip With the Control Panel connected to the PC, you can test newly added codes via
the editor. You press the Test IR button and the code will be sent to the A/V
equipment.
To assign codes to the buttons in the code pages:
1In the Toolsmenu, select My Database Quick Access.
2Select the code from the listand drag-and-drop the code to the button.
4 to 6 inches
(10-15 cm)
TSU9400_INS_ESF.qxd 05-06-2007 14:24 Pagina 10