12 Automatic Channel Setup

2
Press the MENU button.
SELECT opCHOOSE B
→PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
• You can not enter the TUNER SET
UP menu when you are in Line
Input mode (channel 001 or 002).
When you select channel 001 or
002, AV REAR or AV FRONT will
appear on the screen briefly.
• You can not program channels if
you are using a Cable Box or DBS.
• If you select TV at step 4, channels
2-69 will be available. If you select
CABLE TV at step 4, channels 1-
125 will be available.
Helpful Hints
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you set up the channels again.
3
Press the PLAY/obutton or the STOP/pbutton to select
TUNER SET UP, then press the F.FWD/Bbutton.
SELECT opCHOOSE B
→TV
CABLE TV ON
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO ON
2ND AUDIO
TO END PUSH EXIT
4
Press the PLAY/obutton or the STOP/pbutton to select
TV (if you have an antenna) or CABLE TV (if you have a
cable connection). Then, press the F.FWD/Bbutton.
ON will appear beside your choice.
5
Press the PLAY/obutton or the STOP/pbutton to select
AUTO PROGRAMMING, then press the F.FWD/Bbut-
ton. The VCR will place all the channels you receive into its
memory.
6
Wait for a few minutes while the VCR sets up the chan-
nels. When this is complete, CHANNELS ARE SET will appear on
the screen. Then the programming of the lowest channel number
placed in the VCR’s memory will appear on the screen. Now
when you press the CH(annel) o/pbutton, you will scan only
through channels you receive.
2
3-5
1
Press the VCR button.
1
VCA631 only