Philips VCM7177 manual Introduction

Introduction

This camera is especially designed for the Philips Observation System. It can be used in combination with a system monitor (System, Quad or Slave). The System and Quad monitor provides input for up to 4 cameras. The slave monitor can handle 1 camera in a stand-alone configuration. The camera has a standard camera mount allowing installation on, for example, a tripod or wall bracket.

Power supply:

The safe low voltage (16-32V _) for the camera and system accessory is supplied by the monitor through the system cable. If the length of the system cable is more than 200m/600ft a mains power adapter should be used to provide the camera power supply.

Camera accessories:

The following camera accessories are available:

∙Auto-iris lens 4mm (F1.2)

∙Auto-iris lens 8mm (F1.2)

∙Protective camera housing

∙Mains power adapter

g

4