Camera position
1Take the camera, system cable and monitor to the area you want to observe (with the monitor on site, you can check whether the camera covers the required area).
Remark: For outdoor use protective camera housing has to be used to protect the camera from rain and snow.
2Connect the camera to the system monitor (1).
3Connect the system monitor to the mains (2).
4Switch on the mains power switch (3).
The monitor will check the system. After about 30 seconds or when a key is pressed the camera image will appear on the monitor screen.
camera in 
1 2 3 4
video
audio
in
out 
out 
VCR aux
slave
out 
max 24V 2A
power
out alarm gnd
3
1
2
CL 66610005_314A.AI
5If necessary adjust contrast T/brightness (and/or colour S(controls at the front of the monitor) to optimise the camera image.
g
6
