Xtra
4Press 
on the base unit until the two indications turn off.
•If registration is successful, the signal icon 
displays steadily.
Tip
If registration failed, repeat the above procedure.
Note
The base can register up to 4 handsets, then the base unit registration memory is full. If you attempt to register an additional handset, the registration process will be aborted. You can use additional base units, see “Register your handset(s) with additional base”, page 16.
3.3.1 Verify the signal strength
The signal icon | displays the link status | |
between the handset and the base unit. | ||
Signal icon | : The handset and base unit are | |
linked. They can communicate. | ||
No signal icon |
| : The handset and base unit |
have lost link. They are not able to communicate. Take your handset closer to the base unit to reconnect the link.
If you move too far away from the base unit while you are on the phone, you will hear warning tones notifying you that the handset is almost out of range - lost link. Take the handset closer to the base unit or your call will be cut off shortly after the warning.
Note
If your handset has lost link, you will not be able to make or receive any call. In addition, you will not be able to carry out many of the phone functions and features.
3.4 Turn the handset ON/OFF
3.4.1Turn the handset ON Press 
.
• The handset may take a few seconds to power up.
Getting started
3.4.2 Turn the handset OFF
1Press and hold 
for 2 seconds.
•The power menu is displayed.
2Scroll to Switch Off. Press Select .
•The handset is switched off.
Note
The handset cannot receive any call if the power is switched off.
9
ENGLISH
