10 Hookups With a Stereo TV
antenna or cable to ANT(enna) IN Jack
|
| ANT OUT |
|
| CH3 |
| AUDIO | CH4 |
13.2V | OUTPUT | ANT IN |
| ||
| VIDEO |
|
VIDEO (yellow) and AUDIO (white) |
|
|
OUTPUT Jacks |
|
|
Video Cable
Audio Cable 
Audio and Video IN Jacks on TV
●Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCP.
2
Connect a video cable to the yellow VIDEO OUTPUT Jack on the back of the VCP. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.
3
Connect an audio cable to the white AUDIO OUTPUT Jack on the back of the VCP. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV. (If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s left and right channels.)
4
Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.
Helpful Hint
• This hookup will not give you stereo sound. To get stereo sound, use the connections on pages
