Philips VPA115AT owner manual Hookups Without a Cable Box cont’d, Plug in the TV and the VCP

Hookups Without a Cable Box (cont’d) 7

3

Connect the RF coaxial cable (supplied) to the ANT(enna) OUT jack on the back of the VCP and to the ANTENNA IN Jack on the TV. (You may use either

a snap-on type or screw-on type of coaxial cable, whichever you prefer. A snap-on type is supplied.)

			ANT OUT
			CH3
		AUDIO	CH4
	13.2V	OUTPUT	ANT IN
		VIDEO
	ANT OUT
	CH3		75	Ω
			ANT		/
	CH4		CABLE
Antenna
or Cable	ANT IN
			RF coaxial cable

ANTENNA IN Jack

(on back of TV)

example only

4

Plug in the TV and the VCP.

5

Set the CH3/CH4 switch on the back of the VCP to CH3 or CH4, whichever channel is not used or least used in your area. To operate your VCP with your TV, set the TV to the same channel. For example, when playing a tape, if the CH3/CH4 switch is set to CH3, the TV should be on channel 3.

CH	4
or	3
CH
	CH3 / CH4
TV	Switch
	CH3
	CH4

6

		ANT OUT
		CH3
	AUDIO	CH4
13.2V	OUTPUT	ANT IN
	VIDEO

ANT OUT

CH3

CH4

ANT IN

You are ready to turn on the VCP.