Philips VPA115PR Before Using Your VCP, Putting Batteries in the Remote Control, VCR Maintenance

Before Using Your VCP 5

Putting Batteries in the Remote Control

1

Remove the battery compartment lid on the bottom of the remote control by sliding the lid in the direction of the arrow.

2

Insert two AA batteries inside the battery compartment

with their + and – ends aligned as indicated.

3

Replace the battery compartment lid.

Using the Remote Control

●Point the remote control at the VCP’s remote sensor when operating the VCP.

●Do not put objects between the remote control and the VCP.

VCR Maintenance

●Use only tapes with the mark.

●Remove any light adhesive stick-on notes from the video cas- sette tape before putting the tape in the VCP. Removable labels can jam the VCP.

●Periodic maintenance is required to maintain your VCP’s excel- lent performance. This VCP has an Automatic Head Cleaner. However, the video heads will require replacement eventually. Only an authorized service center should perform this service.

1

2

3

Types of Video Cassette Tapes

The chart below shows the playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP.

	Cassette type/Playback Time
Tape Speed	T160	T120		T60
SP (standard play)	2 hrs.	2	hrs.	1 hr.
	40 mins.
LP (long play)	5 hrs.	4	hrs.	2 hrs.
	20 mins.
SLP (super long play)	8 hrs.	6	hrs.	3 hrs.

Helpful Hints

•The remote control and its batteries are supplied.

•Do not mix alkaline and man- ganese batteries.

•Do not mix old and new batteries.