Rear Panel 15
AC Power Cord | CH3/CH4 Switch | ANT(enna) OUT Jack |
Connect to a standard AC outlet | Use the supplied RF coaxial cable | |
to supply power to the VCP. | Set to channel 3 or 4 to | to connect this jack to the |
Make sure the car battery cord is | use your TV with your | ANTENNA IN jack on your TV |
disconnected from the VCP. | VCP. Details are on pages | or Cable Box. |
| Details are on pages |
|
| ANT OUT |
|
| CH3 |
| AUDIO | CH4 |
|
| |
DC 13.2V | OUTPUT | ANT IN |
| ||
|
| |
| VIDEO |
|
AUDIO OUTPUT Jack | VIDEO OUTPUT Jack | |
Use an audio cable (not supplied) to | ||
Use a video cable (not supplied) to | ||
connect this jack to the Audio In | ||
connect this jack to the Video In jack | ||
jack of a TV, camcorder, VCR, or | ||
of a TV, camcorder, VCR, or moni- | ||
audio system. | ||
tor. Details are on page 10. | ||
Details are on page 10. | ||
|
ANT(enna) IN Jack
DC 13.2V Jack
Connect the car battery cord here when you use the VCP in your vehicle. Details are on page 11.
Connect your antenna or cable here. Details are on pages
