Philips VR220CAT Automatic Channel Setup, Press the VCR button, then press the Menu button

12 Automatic Channel Setup

Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up the channels again.

1

Press the VCR button, then press the MENU button.

SELECT op CHOOSE B	1
→ PROGRAM
VCR SET UP

TUNER SET UP

SET CLOCK

TO END PUSH EXIT

2

Press the PLAY/o button or the STOP/p button to select TUNER SET UP, then press the F.FWD/B button.

SELECT op CHOOSE B

→AUTO PROGRAMMING ADD/DELETE CH

CH MEMORY REVIEW

TO END PUSH EXIT

3

Press the PLAY/o button or the STOP/p button to select AUTO PROGRAMMING, then press the F.FWD/B but- ton. The VCR distinguishes between TV channels and cable chan- nels, and the VCR will memorize all the channels you receive.

AUTO CH PROGRAMMING

IN PROCESS

PLEASE WAIT

2-3

EJECT

POWER

MENU STATUS/EXIT CLEAR

1 2 3

4 5 6

7 8 9

MEMORYALT.CH

	0
REC	PAUSE
/OTR	/STILL

PLAY

REW F.FWD

STOP

CH.VOL.

MUTE

VCR TV

VCR/TV SPEED

STARTFINISH

4

Wait for a few minutes while the VCR sets up the chan- nels. When this is complete, CHANNELS ARE SET will appear on the screen. Then the programming of the lowest channel number placed in the VCR’s memory will appear on the screen. Now when you press the CH(annel) o/p buttons, you will scan only through channels you receive. You may still select non-memorized channels by pressing the Number buttons.

Helpful Hints

•You can not enter the TUNER SET UP menu when you are in Line Input mode (channel 001 or 002). When you select channel 001 or 002, AV REAR or AV FRONT will appear on the TV screen briefly.

•You can not program channels if you are using a Cable Box or DBS.

•If you have an antenna, channels 2- 69 will be available. If you have a cable connection, channels 1-125 will be available.

•You may need to repeat the steps on this page if a power failure occurs.