12 Automatic Channel Setup
Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up the channels again.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B | 1 |
→ PROGRAM | |
VCR SET UP |
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY/o button or the STOP/p button to select TUNER SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
→AUTO PROGRAMMING ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO | ON |
2ND AUDIO |
|
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select AUTO PROGRAMMING, then press the F.FWD/B but- ton. The VCR distinguishes between TV channels and cable chan- nels, and the VCR will memorize all the channels you receive.
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
STARTFINISH
EJECT
POWER
MENU STATUS/EXIT CLEAR
1 2 3
4 5 6
7 8 9
MEMORYALT.CH
| 0 |
REC | PAUSE |
/OTR | /STILL |
PLAY
REW 
F.FWD
STOP
CH.VOL.
| MUTE |
|
VCR | TV | CBL/DBS |
VCR/TV | SPEED | TIME SEARCH |
| ENTER | SLOW |
4
Wait for a few minutes while the VCR sets up the chan- nels. The channel numbers will appear on the VCR display panel as they are scanned. When this is complete, CHANNELS ARE SET will appear on the screen. Then the programming of the lowest channel number placed in the VCR’s memory will appear on the screen. Now when you press the CH(annel) o/p buttons, you will scan only through channels you receive. You may still select
Helpful Hints
•You can not enter the TUNER SET UP menu when you are in Line Input mode (channel 001 or 002). When you select channel 001 or 002, AV REAR or AV FRONT will appear on the TV screen briefly.
•You can not program channels if you are using a Cable Box or DBS.
•If you have an antenna, channels 2- 69 will be available. If you have a cable connection, channels
•You may need to repeat the steps on this page if a power failure occurs.
