Philips VR624CAT owner manual Press the Mute button Within 30 seconds, press the TV button

Setting the Remote to Operate a TV 21

Your VCR remote control may operate your TV. If the remote control doesn’t operate your TV now, follow the steps below.

1

Point the remote control at your TV and press the TV button. Then, press the POWER button. If your TV turns on or off, try the other TV buttons (see pages 24-25). If your TV doesn’t turn on or off, or if the other buttons don’t work, go to step 2.

2

Find the brand of your TV on the list below, and remem- ber the two-digit number beside it.

TV CODES

EMERSON	. . . . . .14	PHILCO	. . . . . .14
FISHER	. . . . . .11	PHILIPS	. . . . . .01
GE	. . . . . .10	PHILIPS MAGNAVOX.	.01, 02, 03
GOLDSTAR	. . . . . .04	QUASAR	. . . . . .07
HITACHI	. . . . . .12	RCA	. . . . . .10
JVC	. . . . . .05	SAMSUNG	. . . . . .17
MAGNAVOX	01, 02, 03	SANYO	. . . . . .11
MARANTZ	. . . . . .13	SEARS	. . .08, 11
MITSUBISHI	. . . . . .13	SHARP	. . . . . .16
MONTGOMERY WARD . . . .14		SONY	. . . . . .09
PANASONIC	. . . . . .07	TOSHIBA	. . . . . .08
PANASONIC-GAOO .	. . . . . .07	ZENITH	. . .06, 15

3

Press the MUTE button.

4

Within 30 seconds, press the TV button.

2Find your

TV code. 1&6

	EJECT		POWER
	MENU	STATUS	CLEAR	TIME
		/EXIT		SEARCH
5	1	2		3
	4	5		6
	7	8		9
	MEMORY	0		ALT.CH
	REC			PAUSE
	/OTR	PLAY		/STILL
	REW		F.FWD
3		STOP
	CH.			VOL.
		MUTE
	VCR	TV	CBL	ENTER
4			/DBS
	VCR/TV	SPEED	SLOW

5

Within 30 seconds, press the Number buttons to enter the two-digit code for your TV brand. For example, if you have a Zenith TV, press Number buttons 0, 6.

6

Repeat step 1. If the remote control works your TV, you’re fin- ished. If the remote control still doesn’t work your TV, repeat steps 3-5, using a different code for your brand (if available).

There is no guarantee that the

remote will work your TV.

Helpful Hints

•The remote control may only operate some features of your TV. For exam- ple, the remote control may turn on the TV power, but it may not change channels at the TV.

•If you can not change the channels at the TV using the Number buttons, press the ENTER button after you press the Number buttons. It may change channels at the TV.

•When you replace the batteries in the remote control, you may need to program the remote control again.

•Remember to point the remote con- trol toward the TV during steps 1-6.