|
|
| Problem solving (Timer programming) | |
|
|
|
|
|
|
|
|
|
|
| PROBLEM | SOLUTION | ||
|
|
|
| |
| Error message: | A recording was programmed, but there is no cassette in the machine. Insert a |
| |
|
|
|
| |
| “NO CASSETTE” | cassette without erase protection ready for recording. |
| |
|
|
| ||
|
|
|
| |
| Error message: | A recording was programmed, but the video recorder was not switched into |
| |
| “SWITCH TO STANDBY - | timer mode with the Standby button. Press STANDBY/ON m, in order to make |
| |
| TIMER RECORDING” | the programmed recording.Warning: if you do not do this, the video recorder will |
| |
| not record. |
| ||
|
|
|
|
|
|
|
| A recording was programmed, but there is no cassette in the machine. Insert a | |
| “k” and/or “v” are | cassette without erase protection ready for recording. |
| |
| A recording was programmed, but the video recorder was not switched into |
| ||
| flashing in the display |
| ||
| timer mode with the Standby button. Press STANDBY/ON m, in order to make |
| ||
| of the video recorder |
| ||
| the programmed recording.Warning: if you do not do this, the video recorder will |
| ||
|
|
| not record. |
|
|
|
|
|
|
Error message:
“MEMORY FULL”
Cassette is ejected during recording
Cassette is ejected after programming
The set cannot be used during recording
Year/month/date/time screen appears
All the available memory locations in your video recorder for timer and VIDEO Plus programming are full. Delete a programmed recording (see chapter “Delete / check / change programmed recordings”).
The end of the tape was reached during a programmed recording.The recording could not be completed satisfactorily.
A cassette with erase protection was inserted. Please deactivate the erase protection or insert another cassette which is ready for recording.
Once started, a recording can only be interrupted by pressing the STANDBY/ON
button m. WARNING: This will not only stop the recording, but it will also delete the programmed recording from the memory of the video recorder.
The time has not been set or not set correctly. After entering/confirming year, month, date and time you can continue programming.
Recording via external sources
If you want to watch or record transmissions from a satellite receiver, films from a video camera (or from other external devices), connect the device to the scart socket EXT1 AV1 or EXT2 AV2 and select the programme number on your video recorder “E1” or “E2”.
FOR
EXPERTS
PROBLEM SOLVING (TIMER PROGRAMMING) | 38 | ENGLISH |
|
