12Before you call an engineer

PROBLEM

Set no longer reacts when buttons are pressed

The set is still not reacting, the display shows e.g. “E000”

Cassette is jammed in video recorder

POSSIBLE CAUSE / SOLUTION

4The power supply has been interrupted / failed

4 A programmed recording is running. Interrupt with the Standby button m 4 Child lock is activated: Switch this function off

4Technical interference: Remove the mains plug from the socket and reinsert it

4 Remove the mains plug from the socket, hold down the Standby button m on the front of the video recorder and reinsert the mains plug. When

“--:--” or “E1” appears in the display you can release m.Warning:All data memories of the set (TV channel, time, timer) have been deleted.

4 Do not use force! Briefly remove the mains plug and then reinsert it

Remote control does not work

No playback from video recorder

Poor quality playback from video recorder

4 Aim the end of the remote control at the display of the video recorder

4 Remove the batteries from the remote control and wait a few seconds before replacing them

4 Batteries weak or flat: Change the batteries

4 No recording on the cassette

4 Select the TV programme number allocated to video operation

4 Check that the TV channel number allocated to video operation is correct 4 Cable connection loose/missing: Check the connections

4 Check the TV to make sure that the programme number allocated to video operation is correct

4 Cassette worn/faulty

4Tracking not correctly adjusted: Carry out the “Optimizing tracking” function

No recording possible

4TV channel not stored or wrongly selected

4 Cassette with erase protection inserted

Programmed recording not working

4 Storage position incorrectly/incompletely programmed

4Time/date not set correctly

4 Cassette with erase protection inserted

Picture and/or sound interference in TV reception

4 Optimize the modulator or switch it off (when using a scart cable) 4 Check the aerial cable connection

TV reception still not perfect

4The Department of Trade and Industry operates a specialist service to help TV licence holders improve reception of BBC and ITC programmes and to prevent interference. If your dealer cannot help, ask at a main Post Office for the booklet “How to improve Television and Radio Reception”.

 

TECHNICAL DATA

Dimensions in cm (W/H/D):

43,5/9,3/29,0

Power consumption

18 W

Energy consumption (Low Power Standby)

< 4W

Mains voltage:

198-264 V / 50 Hz

Number of video heads:

4

Number of audio heads:

1linear, 2 FM

Rewind / forward wind speed:

approx. 90 seconds (E180 cassette)

Recording/playback speed (E-240 cassette):

SP (Standard Play) 4 hours, LP (Long Play) 8 hours

 

 

PROBLEM SOLVING / TECHNICAL DATA

52

ENGLISH

 

Page 52
Image 52
Philips VR 708/07 operating instructions 12Before you call an engineer, Problem