Philips SPP5107C/17 manual Additional information about your energy efficient surge protector

EN

Additional information about your energy efficient surge protector

Features

Your energy efficient surge protector is specifically designed to fit within your home theater setup. You can conveniently control the on/off of your devices in either zone 1 or zone 2 outlets with your remote control. When switched to the off position, it eliminates the consumption of the stand-by power to these outlets, bringing energy savings to your fingertips.

Zone 1 & 2 outlets group your devices by usage.

Always on outlets remain on even when other outlets are switched off – these are ideal for devices which have volatile memory and require constant power. (i.e. cable modems, DVRs , set top boxes, etc)

Remote control turns your devices on/off in zone 1 & zone 2 with the touch of a button.

Cable management clips help eliminate cable clutter.

LED indicators on the front of the unit provide worry-free protection and show that your surge protector functions properly.

Grounded – (green) shows that the outlets in your surge protector are properly grounded.

Protecting – (red) shows that your surge protector is actively protecting your devices.

Zone 1 & Zone 2 – (green) lights to show that the group of outlets have been switched on.

TV

AMP	STB
	DVD

Zone 1

Zone 2 Always on

Remote control

Cable management clips

GROUNDED

ZONE 1 ZONE 2

PROTECTING

Instructions for changing the remote control battery

NOTE: If the remote control device stops working, replace the battery.

							RF
	(1)			ation			FCC ID:Remote
								OYMSPP5107C
			15This							Control
			Op	er	thedevice
				of
(2		Thisfollowing			two	isFCC	complies
in	)harmful
	This		device				Rules.	with
						subject to
undinterferterferencedeviceinterferenmayconditions:the									part
Ch.esired	nce		must			not
A
		received,includingany
		that				e,and	cause
	operatio may				accept
	Made in			cause
			China

Step 1 - Turn the unit over and slide open the battery compartment cover.

Step 2 - Remove and dispose of the old battery properly. Do not throw the old battery in the trash.

Step 3 - Insert a new battery and close the compartment cover. Replace ONLY with a 3 volt CR2032 type button cell battery.

NOTE: The remote control with this unit operates on either channel A or channel B frequency. If you have purchased more than one unit, make sure you have two different frequencies (A and B) as indicated by stickers on the bottom of the unit and on the packaging.

PWR SRG_insert_17_EN_V1.0 wk10113