26 Appendix
11.11Terminal Equipment
Note
This equipment meets the applicable Industry
Canada Terminal Equipment Technical
Specifications.
This is confirmed by the registration number. The
abbreviation, IC, before the registration number
signifies that registration was performed based on
a Declaration of Conformity indicating that
Industry Canada technical specifications were
met. It does not imply that Industry Canada
approved the equipment.
Note
The Ringer Equivalence Number (REN) for this
terminal equipment is marked on the equipment
itself. The REN assigned to each terminal
equipment provides an indication of the
maximum number of terminals allowed to be
connected to a telephone interface. The
termination on an interface may consist of any
combination of devices subject only to the
requirement that the sum of the Ringer
Equivalence Numbers of all the devices does not
exceed five.
11.12Radio Equipment
The term “IC:” before the radio certification
number only signifies that Industry Canada
technical specifications RSS-213 and ICES-003
were met. Operation is subject to the following
two conditions : (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.
11.13Do not attempt to repair or modify
this equipment
Repairs to certified equipment should be made by
an authorized maintenance facility designated by
the supplier.
Any repairs or alterations made by the user to
the equipment may render the equipment void in
product warranty and compliance. This could also
void the user’s authority to operate the
equipment.
USA/CANADA Service Center
PHILIPS
1881 Route 46 West
Ledgewood, NJ 07852
Phone: 1-800-233-8413 (English/Français)
E-mail: accessorysupport@philips.com
11.14 The RBRC® seal
The RBRC® Seal on the nickel
metal hydride battery indicates
that Philips Royal Electronics is
voluntarily participating in an
industry program to collect and
recycle these batteries at the end
of their useful lives, when taken out of service
within the United States and Canada.
The RBRC® program provides a convenient
alternative to placing used nickel metal hydride
batteries into the trash or municipal waste, which
may be illegal in your area.
Philips’s participation in RBRC® makes it easy for
you to drop off the spent battery at local retailers
participating in the RBRC® program or at
authorized Philips product service centers. Please
call 1-800-8-BATTERY for information on Ni-MH
battery recycling and disposal bans/restrictions in
your area. Philips’s involvement in this program is
part of its commitment to protecting our
environment and conserving natural resources.
RBRC® is a registered trademark of Rechargeable
Battery Recycling Corporation.