Philips XL 665 manual Advanced Settings

Models: XL 665

1 43
Download 43 pages 54.25 Kb
Page 30
Image 30

11 Advanced Settings

Discover and explore the additional settings your phone offers! Find out how these features can benefit you and help you make the most of your phone.

11.1ECO mode

The ECO mode reduces the transmission power of the handset and base station.

1Press MENU.

2Select ADV. SETTING > ECO, then

press OK to confirm.

3Select the new setting, then press OK to confirm.

The setting is saved.

is displayed instead of in standby mode.

Note

When the ECO mode is activated, the connection range between the handset and the base station can be reduced.

11.2Registering handset(s)

The procedures described below are the procedures you will find in your handset. The procedures may vary according to the handset you want to register. In this case, refer to the manufacturer's instruction of the additional handset.

Additional handsets must be registered to the base station before you can use them. Your base station can register up to 5 handsets. The system PIN may be required for registering or unregistering handsets.

28

11.2.1Auto registration

1 Place the handset on the base station. The handset will detect the base and start to register automatically.

• Registration shall be completed in less than 2 minutes. The base automatically assigns a handset number to the handset.

11.2.2Manual registration

If the base station is of a different make from XL665, the handset and base linking may not be achieved during auto registration mode. Follow the instructions below to register your handset manually to the base station.

1Press MENU.

2Select ADV. SETTING > REGISTRATION. Press OK.

• The display shows PRESS PAGE

KEY FOR 5 SEC.

3Press OK to continue.

4On the base station, press and hold _for approximately 5 seconds.

5 Enter the system PIN (Pre-set: 0000). Use CLEAR to make corrections.

6 Press OK to confirm the PIN.

• Registration shall be completed in less than 2 minutes. The base automatically assigns a handset number to the handset.

Note

If the PIN is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration failed.

Note

The pre-set system PIN code is 0000 and it cannot be changed.

Advanced Settings

Page 30
Image 30
Philips XL 665 manual Advanced Settings