Using Beard Styler with Comb
- Use the comb when trimming your beard.
- The length settings on the beard styler
attachment correspond to the remaining hair
length of your beard after cutting.
- Choose any setting between 3/64-11/64 in.
(1-4.5mm).
- If you are new to trimming, use the maximum
setting (11/64 in./4.5mm) to prevent accidentally
trimming hairs too short.
1 Press the length selector (1) and push left or
right (2) to select desired hair length setting.
2 Turn appliance ON.
3 Style your beard as desired always making sure
the front of the comb is in full contact with
the skin and move the appliance against the
direction of hair growth.
Note: If cut hairs accumulate in the comb, turn the
appliance off, remove comb and blow and/or shake
hair out of the comb.
Tip: Tr y different trimming positions (i.e.
upwards, downwards or across) since all hairs
do not grow in the same direction. Practice
for best results.
4 Turn appliance OFF.
5 Clean Beard Styler and comb after each use
(see ‘Cleaning’).
English 15
12_YS524.indd 15 11/12/12 11:54 AM