Using Beard Styler without the Comb
- Use the beard styler attachment without the
comb to contour or cut shapes in your beard hair.
1 Remove the Beard Styler comb.
2 Turn appliance ON.
3 Contour your beard as desired.
Be careful, the styler cuts hairs very close to the
skin, at a length of 3/64 in./1mm.
4 Turn appliance OFF.
5 Clean Beard Styler after each use (see
‘Cleaning’).
Body grooming
- Only use the Bodygroom attachment to groom or
trim body hair below the neckline. Do not use it
to shave or trim facial or scalp hair.
Note: Before using, check foil, cutters, trimmers
and combs for wear or damage. If they show
signs of wear or damage, do not use. Replace
immediately (see section ‘Replacing the Bodygroom
Foil’)
1 Pull the shaving attachment straight off the
appliance. Do not twist.
English
16
12_YS524.indd 16 11/12/12 11:54 AM