Amplifier Owner’s Manual
RX400.4 SPECIFICATIONS
Frequency Response: | ± 1dB from 20Hz to 20kHz |
Signal to Noise Ratio: | >100dB |
High and Low Pass Crossovers: | 12dB per Octave |
Crossover Range: | 40Hz to 400Hz |
Low Level Input Range: | 200 millivolts to 8 volts |
Lowest Recommend Load: | 4 ohms Bridged/2 ohms Stereo |
Typical Efficiency: | 50% |
Damping Factor | Greater than 200 |
RX600.5 SPECIFICATIONS
FRONT AND REAR CHANNELS: |
|
Frequency Response: | ± 1dB from 20Hz to 20kHz |
Signal to Noise Ratio: | >100dB |
High and Low Pass Crossovers: | 12dB per Octave |
Front/Rear High Pass Crossover Range: | 15Hz to 250Hz |
Low Level Input Range: | 200 millivolts to 8 volts |
Lowest Recommend Load: | 4 ohms Bridged/2 ohms Stereo |
Typical Efficiency: | 55% |
Damping Factor | Greater than 200 |
SUBWOOFER CHANNEL: |
|
Frequency Response: | ± 1dB from 20Hz to 300Hz |
Signal to Noise Ratio: | >100dB |
Low Pass Crossover: | 12dB per Octave |
Low Pass Crossover Range: | 30Hz to 300Hz |
Bass Boost @ 45Hz: | 0 to +18dB |
Low Level Input Range: | 200 millivolts to 8 volts |
Lowest Recommend Load: | 2 ohms |
Typical Efficiency: | 85% |
Damping Factor: | Greater than 200 |
SPECIFICATIONS
RMS Power Output | 75w x 4 @ 4 ohms Stereo | |
| 100w x 4 | @ 2 ohms Stereo |
| 200w x 2 | @ 4 ohms Bridged |
Power/Ground Wire Size: | 8 Gauge |
|
Recommend Power Wire Fuse: | 50a |
|
Dimensions (Includes Feet): | 14.5” L x 8.4”W x 2.1” H | |
| 368mm L x 213mm W x 53mm H | |
RMS Power Output | 60w x 4 @ 4 ohms Stereo |
| 80w x 4 @ 2 ohms Stereo |
| 160w x 2 @ 4 ohms Bridged |
RMS Power Output | 200w x 1 @ 4 ohms |
| 300w x 1 @ 2 ohms |
Recommend Power Wire Fuse: | 80a |
Power/Ground Wire Size: | 4 Gauge |
Dimensions (Includes Feet): | 14.5” L x 8.4”W x 2.1” H |
| 368mm L x 213mm W x 53mm H |
Phoenix Gold • www.phoenixgold.com
