FRONT, Rear and SUB Inputs, SUB Input Switch

Amplifier Owner’s Manual

SD800.5

5 CHANNEL POWER AMPLIFIER

FRONT, REAR AND SUB INPUTS

Connect preamp signal cables from headunit to these inputs. The front AND rear inputs must be used, if only the front input is used then the rear speaker outputs will have no output signal. The Sub Input may or may not be used see SUB INPUT SWITCH for more information.

HPF AND LPF CROSSOVER FREQUENCY

Controls the crossover point for the speaker outputs.

REMOTE LEVEL CONTROL

This port is for connecting the subwoofer remote level control. This allows up to 20dB of volume adjustment. This is not a bass boost, it controls the level of the subwoofer channel only.

NOTE: This control is not compatible with the Phoenix Gold LPL44 level control.

BASS BOOST

Variable bass boost from 0 to +18dB @ 45Hz for the subwoofer channel only.

SENS

Used to reach maximum amplifier power with a wide variety of headunits.

SUB INPUT SWITCH

IN: Subwoofer speaker output is fed by the sub Input. If the headunit or processor has a subwoofer low level output use this setting.

OUT: Subwoofer speaker output is fed by the front input and the sub Input is not used. If the headunit or processor only has front and rear low level outputs use this setting.

PROTECT REMOTE

POWER

	SUB INPUT							FRONT INPUT	REAR
L								FL	RL
	SUB INPUT		SENS		BASS BOOST			LPF
R	SUB	FRONT	MIN	MAX	0dB	18dB	30Hz	300Hz
R	HPF		SENS		HPF		SENS FR		RR
	15Hz	250Hz	MIN	MAX	15Hz	250Hz	MIN	MAX

GROUND	R	+ 12V	FUSE	FL
				FL

SUB.

GROUND	REMOTE	+ 12V	30A	30A				RL
								RL

SUB.

+12V

This must be connected to the fused positive terminal (+12V) of the car’s battery. The fuse must be located within 18 inches of the battery.

REMOTE

This must be connected to switched +12V, usually a trigger wire coming from the head unit or ignition.

GROUND

This must be connected to the negative terminal of the car’s battery or bolted to a clean, unpainted part of the chassis of the vehicle.

SPEAKER OUTPUTS

Used to connect the amplifier to speakers. Front and Rear Channel minimum impedance is 4 ohm bridged or 2 ohm stereo. Subwoofer channel minimum impedance is 2 ohm. Use Right + and Left - to bridge the front or rear channels, the subwoofer channel is not bridgeable.

NOTE: Visible through the plexiglass cover, a single blue power LED is located in the lower corner of all SD amplifiers.

SD800.5, SD500.4, SD600.1, SD300.1 specifications

Phoenix Gold is renowned for its high-performance car audio amplifiers, and the SD series, including the SD300.1, SD600.1, SD500.4, and SD800.5, showcases the brand’s commitment to quality and innovation. Each model in the SD series is designed to meet diverse audio needs, ensuring exceptional sound output and reliability.

The SD300.1 is a compact yet powerful mono amplifier, delivering up to 300 watts RMS at 1 ohm. This model is ideal for powering a subwoofer, thanks to its efficient Class D design that provides high output with minimal power consumption. Equipped with low and high pass filters, the SD300.1 allows users to customize their sound, ensuring a tailored audio experience.

Next in line is the SD600.1, which offers even greater power, producing up to 600 watts RMS at 1 ohm. This amplifier is perfect for audiophiles looking for deep bass response. Its variable bass boost feature enhances low frequencies, while a sleek design allows for easy installation in a variety of vehicles. The SD600.1 boasts advanced thermal overload and short circuit protection, ensuring durability and longevity.

For those requiring multi-channel options, the SD500.4 is a versatile 4-channel amplifier delivering 125 watts RMS per channel at 4 ohms. This model is ideal for powering both speakers and subwoofers, making it a great option for a complete sound system. Additionally, the SD500.4 features high and low level inputs, expanding its compatibility with various audio sources.

Lastly, the SD800.5 combines the power of both mono and multi-channel amps. With 800 watts RMS, this 5-channel amplifier is capable of powering an entire sound system—subwoofers and speakers alike. The SD800.5's bridgeable channels allow for further flexibility, enabling users to tailor their audio setup to match their preferences. Its compact build and advanced cooling system make it suitable for space-constrained installations while preventing overheating during intense listening sessions.

All amplifiers in the Phoenix Gold SD series emphasize build quality, featuring heavy-duty heat sinks and gold-plated connectors for improved signal transfer. With their cutting-edge technologies and robust features, the SD300.1, SD600.1, SD500.4, and SD800.5 are standout choices for car audio enthusiasts seeking powerful sound enhancement in their vehicles.

Phoenix Gold SD600.1, SD500.4, SD800.5 FRONT, Rear and SUB Inputs, HPF and LPF Crossover Frequency

Models: SD800.5 SD500.4 SD600.1 SD300.1