Amplifier Owner’s Manual
SPECIFICATIONS
Z500.1 SPECIFICATIONS
Frequency Response: Signal to Noise Ratio: Low Pass Crossover:
Subsonic Filter:
Low Pass Crossover Range: Subsonic Crossover Range: Bass Boost @ 45Hz:
Low Level Input Range: Lowest Recommend Load: Typical Efficiency: Damping Factor:
±1dB from 20Hz to 300Hz >100dB
12dB per Octave 12dB per Octave 30Hz to 300Hz 10Hz to 55Hz
0 to +18dB
200 millivolts to 8 volts
2 ohms
50%
Greater than 200
Power Output: | 300 x 1 @ 4 ohms |
| 500 x 1 @ 2 ohms |
Power/Ground Wire Size: | 8 Gauge |
Dimensions (Includes Mounting Feet): | 12.5” L x 8.34”W x 2.1” H |
| 318mm L x 213mm W x 53mm H |
Z250.2 SPECIFICATIONS
Frequency Response: Signal to Noise Ratio:
High and Low Pass Crossovers: Crossover Range:
Bass Boost @ 45Hz: Low Level Input Range: Lowest Recommend Load: Typical Efficiency: Damping Factor
±1dB from 20Hz to 20kHz >100dB
12dB per Octave 40Hz to 400Hz 0 to +18dB
200 millivolts to 8 volts
4 ohm Bridged or 2 ohm Stereo
50%
Greater than 200
Power Output | 75 x 2 @ 4 ohms Stereo | |
| 125 x 2 | @ 2 ohms Stereo |
| 250 x 1 | @ 4 ohm sBridged |
Power/Ground Wire Size: | 8 Gauge | |
Dimensions (Includes Mounting Feet): | 8.2” L x 8.34”W x 2.1” H | |
| 208mm L x 213mm W x 53mm H | |
Z500.4 SPECIFICATIONS
Frequency Response: | ± 1dB from 20Hz to 20kHz |
Signal to Noise Ratio: | >100dB |
High and Low Pass Crossovers: | 12dB per Octave |
Crossover Range: | 40Hz to 400Hz |
Low Level Input Range: | 200 millivolts to 8 volts |
Lowest Recommend Load: | 4 ohm Bridged or 2 ohm Stereo |
Typical Efficiency: | 50% |
Damping Factor | Greater than 200 |
Power Output | 75 x 4 @ 4 ohms Stereo | |
| 125 x 4 | @ 2 ohms Stereo |
| 250 x 2 | @ 4 ohms Bridged |
Power/Ground Wire Size: | 8 Gauge | |
Dimensions (Includes Mounting Feet): | 12.5” L x 8.34”W x 2.1” H | |
| 318mm L x 213mm W x 53mm H | |
© 2012 Phoenix Gold • www.phoenixgold.com
