SERVICE
The photographer should not attempt to make repairs.
Consult a dealer for an authorized Photogenic Professional Lighting service agent. This will provide you safety, insure proper operational functions and provide continuation of your warranty.
For replacing the flashtube or modeling lamp, follow the directions and specifications given earlier in this manual in the setup section.
Before removing the old tubes or installing new tubes, always unplug your Skylighter and PowerLight generator and discharge the stored energy by pressing the “test” button. Unplug the cable connecting the Skylighter to the PowerLight generator. It is now safe to change the lamps in the Skylighter.
General Trouble Shooting
COMMON PROBLEMS AND CAUSES
Unit does not flash.
Probable causes:
a.No power. (Check cable connections and PowerLight generator status.)
b.One or more tubes not flashing. (Flash tube jarred loose or broken from rough transport. Check.)
Modeling light does not turn on.
Probable causes:
a.Switch OFF. (Turn ON.)
b.No power. (Check that PowerLight generator is set to FULL ON.)
c.Lamp burned out. (Inspect and replace, when cool. See SERVICE section of this manual)
