Pico Macom SIRD-FTA Transponder Search, Frequency, Polarization, Symbol rate, Network search

MAIN MENU

Transponder Search

Check the transponder signal and search channels.

Select <Transponder Search> by using CH+/–. Press OK to view the sub-menu as shown in the following figure.

A. Sat name

To select <Sat name>, press VOL+. Select satellite by using CH+/– or PGUP/PGDW, then press OK to confirm it.

B. Frequency

Select a valid transponder in the satellite or input the frequency (0-20000 MHz).

C. Polarization

Select the polarization of transponder between HOR and VER by using VOL+/–.

D. Symbol rate

Press numeric keys to enter your required value manually.

E. FEC (Forward Error Correction)

Select the FEC of transponder by using VOL+/–. Available options are Auto, 1/2, 2/3, 3/4, 5/6 and 7/8.

F. Network search

Select <YES> for a network search of the transponder.

Select <NO> to search only the transponder channels.

G. FTA Only

Select FTA Only <Yes> to search only free-to-air channels.

Select FTA Only <No> to search all channels.

H. Advanced Search

Press OK to enter the advanced search menu. Input the Video PID, Audio PID and PCR PID to add a channel.

28 4.3 Installation Settings