Pico Macom TSMS-5/16RK operation manual Front Panel Back Panel Control, Ant

TSMS516RK Manual.qxd 4/12/05 2:57 PM Page 6

Operation and Controls

TSMS-5/16RK

Front Panel

Back Panel Control

1.	18V	22KHz:	5.	ANT IN:
	Connect the 18Vdc 22 KHz output of a LNB to this port.			Connect the cable from a off-air antenna to this port.
2.	14V	22KHz:	6.	OUT:
	Connect the 14Vdc 22 KHz output of a LNB to this port.			Connect a satellite receiver to this port. If an off-air antenna
				is employed, insert a TSDM-2150 diplexer between the OUT
3.	18V	0KHz:		port and the receiver input.
	Connect the 18Vdc 0KHz output of a LNB to this port.
			7.	Power Cord:
4.	14V	0KHz:		Insert the power cord into a 3 prong 120Vac 60Hz
	Connect the 14Vdc 0KHz output of a LNB to this port.			receptacle only.

6 Ph: 800-421-6511 www.picomacom.com

Rev. 04/05