NEVER LEAVE A FAN
OPERATING UNATTENDED
Portable
Air Circulator
IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY, SERVICE OR USE OF THIS FAN. FAILURE TO COMPLY WITH THESE INSTRUCTIONS COULD RESULT IN SERIOUS PERSONAL INJURY AND / OR PROPERTY DAMAGE.
Safety Information
WARNING
1.This unit is designed for indoor use only. Do not expose to elements or allow to become wet.
2.To guard against electric shock while operating, do not allow fan to come in contact with other grounded objects such as pipes, radiators, etc.
3.To reduce the risk of electrical shock, do not use with any solid state speed control device.
4.Do not use to exhaust hazardous chemicals or use near any flammable liquids or gases as sparks from motor may ignite fumes.
5.Turn off, unplug unit, and wait for fan to stop before moving, storing, and / or changing operating locations.
6.Operate only on 115 volt 60 Hz (cycle) current with a minimum of a 15 amp circuit.
7.Before operating always check fan for loose or damaged parts. Inspect power cord for any dam- age. Never use fan if any parts are damaged or missing. Never use fan without safety guards attached.
8.When used with an extension cord, use only cord of proper size (Amp rating), UL listed, and with receptacle to accept three prong grounded plug furnished on the fan’s power cord. Always keep power cord and extension cords away from heat, oil, and sharp edges. Inspect cords periodically and replace if damaged.
9.Disconnect fan from power source when not in use, before servicing and when cleaning or repairing.
10.Repair of this appliance should be done by a qualified electrician.
11.In case of power failure, turn fan off at switch to prevent unexpected restarting and component damage.
12.Keep children away from fan at all times.
Page 2 | Pinnacle Products International, Inc. Portable Air Circulator User’s Manual |
